Sony Digital Camera DSC H1 User Manual

Prepare the battery  
Turn the camera on/set the clock  
Insert a “Memory Stick” (not supplied)  
2-629-893-11 (1)  
1
2
3
Terminal side  
1 Insert the batteries.  
1 Select  
.
2 Press POWER.  
3 To wall outlet  
Match 3/# and  
Digital Still Camera  
(wall socket)  
Battery charger  
Clock Set  
insert.  
Y/M/D  
M/D/Y  
D/M/Y  
2005  
/
1
/
1
12  
:
00  
AM  
Cancel  
OK  
Lighting  
Read This First  
Before operating the unit, please read this manual and “User’s Guide/Troubleshooting” (separate  
volume) thoroughly, and retain it for future reference.  
Open the “Memory Stick” cover.  
Insert the “Memory Stick” all the way in  
until it clicks.  
Close the cover.  
Power cord  
(mains lead)  
When there is no “Memory Stick” inserted  
Operating Instructions  
CHARGE lamp  
The camera records/plays back images using the internal memory (32 MB). t “User’s Guide/  
Troubleshooting” (page 24)  
Light on: Charging  
Light off: Completed (Remove the  
batteries.)  
3 Set the clock with the control button.  
1 Select the date display format with v/V, then press z.  
2 Connect the power cord  
(mains lead).  
Clock Set  
Select the image size for use  
Y/M/D  
M/D/Y  
D/M/Y  
Connect the battery charger to an easily accessible wall outlet (wall socket) close by.  
Even if the CHARGE lamp is not lit, the battery charger is not disconnected from the AC power  
source (mains) as long as it is connected to the wall outlet (wall socket). If some trouble occurs  
while using the battery charger, immediately shut off the power by disconnecting the plug from  
the wall outlet (wall socket).  
4
2005 /  
/
12 : 00  
OK  
AM  
Cancel  
1
1
1 Select a mode.  
2 Press  
(Image Size).  
2 Select each item with b/B and set the numeric value with  
DSC-H1  
When charging is finished, disconnect the power cord (mains lead) from the wall outlet (wall  
socket), and remove the Nickel-Metal Hydride batteries from the battery charger.  
Still image:  
v/V, then press z.  
3 Select the size with v/V.  
Clock Set  
5M  
3:2  
3M  
Y/M/D  
M/D/Y  
D/M/Y  
Nickel-Metal Hydride battery  
Charging time  
Select  
.
NH-AA-DA×2 (supplied)  
Approx. 6 hours  
2005 /  
/
12 : 00  
1M  
VGA  
1
1
OK  
AM  
Cancel  
1M  
(E-Mail)  
Time required to charge fully depleted Nickel-Metal Hydride batteries at a temperature of 25°C  
(77°F). Charging may take longer under certain circumstances or conditions.  
Image Size  
Movie:  
• The screen above is for still images.  
For movies, select [640(Fine)] (“Memory Stick  
PRO” only), [640(Standard)] or [160].  
The CHARGE lamp may remain lit longer than six hours, but this is not a malfunction.  
3 Select [OK] with B, then press z.  
Select  
.
4 Insert the charged batteries.  
Clock Set  
Y/M/D  
M/D/Y  
D/M/Y  
Refer to “User’s Guide/Troubleshooting”  
(separate volume)  
Explains advanced techniques and what to do if you experience trouble with  
your camera.  
Bottom  
4 Press  
(Image Size) to  
2
2005 /  
/
10 : 30  
1
1
OK  
AM  
Cancel  
complete the setting.  
1
1
2
• To cancel, select [Cancel] and press z.  
While pressing OPEN, open the  
battery cover.  
Match 3/# and insert.  
Close the cover.  
Printed on 100% recycled paper using VOC  
(Volatile Organic Compound)-free vegetable  
button  
© 2005 Sony Corporation Printed in Japan  
oil based ink.  
Using batteries other than the supplied ones  
To change the date and time  
Select [Clock Set] in the (Setup) screen and perform the procedure in step 3 above.  
On still image sizes  
You can use HR 15/51:HR6 (size AA) Nickel-Metal Hydride batteries/ZR6 (size AA) Oxy  
For details on the image size t “User’s Guide/Troubleshooting” (page 13)  
Nickel Primary Battery. t “User’s Guide/Troubleshooting” (page 98)  
t “User’s Guide/Troubleshooting” (page 61)  
Image size  
Guidelines  
No. of images  
Printing  
Fine  
Checking the accessories supplied  
5M (2592×1944)  
(the default setting)  
For printing high density images in A4 or  
A5 size  
Less  
Using the AC Adaptor  
On the clock display  
• Ni-MH battery charger BC-  
CS2A/CS2B (1)  
• USB cable (1)  
• Lens cap (1)/Lens cap strap  
(1)  
You can connect the camera using the AC-LS5K AC Adaptor (not supplied). t “User’s Guide/  
Troubleshooting” (page 15). Refer to the operating instructions supplied with the AC Adaptor.  
• If you selected [D/M/Y] in step 3-1, set the time on a 24-hour cycle.  
3:2 (2592×1728)*  
3M (2048×1536)  
1M (1280×960)  
• Midnight is indicated as 12:00 AM, and noon as 12:00 PM.  
For printing in postcard size  
For recording a larger number of images  
For attaching images to e-mail or creating  
web pages  
When turning on the power  
To check the remaining battery time  
• A/V cable (1)  
VGA(E-Mail)  
(640×480)  
• Unless you set the clock, the Clock Set screen appears each time the camera is turned on.  
Press POWER to turn on and check the time on the screen.  
• Do not touch the lens portion as the lens portion extends. Also, do not leave the camera with the lens portion  
extended for a long period of time with the power off as this may cause malfunction.  
More  
Rough  
• Power cord (mains lead) (1)  
Battery  
remaining  
indicator  
• CD-ROM (Cyber-shot  
application software) (1)  
*Images are recorded in the same 3:2 aspect ratio as photograph printing paper or postcards, etc.  
• Shoulder strap (1)  
• The following screen appears when the camera is turned on for the second time or afterwards.  
VGA  
• Operating instructions for  
digital still camera “Read  
This First” (this manual) (1)  
96  
On recordable number of still images and recordable time of movies  
Recordable number of still images and recordable time of movies vary depending on the image  
size selected.  
Battery  
remaining  
guidelines  
Sufficient  
power  
remaining  
Battery half full Battery low,  
recording/  
Change the batteries with  
fully charged ones, or  
charge the batteries. (The  
warning indicator flashes.)  
playback will  
stop soon.  
• Operating instructions  
“User’s Guide/  
Troubleshooting” (1)  
• Lens hood (1)  
S
AF  
For details on recordable number or time t “User’s Guide/Troubleshooting” (page 23)  
• The displayed time remaining may not be correct under certain circumstances.  
Still images  
Movies  
• HR6 (size AA) Nickel-Metal  
Hydride batteries (2)  
A “Memory Stick” is not  
supplied.  
To turn off the power  
• When using Oxy Nickel Primary Battery, the battery remaining indicator does not display the correct  
information.  
Maximum recordable image  
Maximum recordable time  
Press POWER again.  
The camera has the own  
internal memory (32 MB),  
however, purchase of a  
“Memory Stick” is  
recommended.  
• When the AC Adaptor (not supplied) is used, the battery remaining indicator is not displayed.  
• If the camera is running on battery power and you do not operate the camera for a period of time, the camera  
turns off automatically to prevent wearing down the battery (Auto power-off function).  
• Adaptor ring (1)  
To remove the batteries  
Changing the language setting  
• Number of recordable images and time can differ according to shooting conditions.  
• Battery case (1)  
Hold the camera with the battery cover facing upward, then open the battery cover and remove  
the batteries. Be careful not to drop the batteries.  
You can change the screen display to show messages in a specified language. To change the  
language setting, press MENU to display the menu screen. Select  
To remove a “Memory Stick”  
(Setup) with the control  
Open the “Memory Stick” cover, then push  
the “Memory Stick” in once.  
button, then, select [ Language] in  
Guide/Troubleshooting” (page 59)  
(Setup1), and select the desired language. t “User’s  
To use your camera abroad — Power sources  
A
1
You can use your camera, the supplied battery charger, and the AC Adaptor (not supplied) in any  
country or region where the power supply is within 100 V to 240 V AC, 50/60 Hz. Use a  
commercially available AC plug adaptor [a], if necessary, depending on the design of the wall  
outlet (wall socket) [b].  
“Memory Stick”  
cover  
Notes before use  
• Charge the supplied batteries before using the camera for the first time.  
Access lamp  
• The camera is a precision instrument. Be careful not to bump the lens or the LCD screen, and not to  
apply force to it. Attach the shoulder strap to prevent the camera from damage by being dropped, etc.  
t “User’s Guide/Troubleshooting” (page 16)  
• Do not use an electronic transformer (travel converter), as  
this may cause a malfunction.  
BC-CS2A/  
CS2B  
When the access lamp is lit  
Never open the battery cover, remove the “Memory Stick” or turn off the power. The data may be  
corrupted.  
Additional information on this product and answers to frequently asked questions can be  
found at our Customer Support Website.  
continued on the reverse  
 

Sharper Image Binoculars SR294 User Manual
Shop Vac Vacuum Cleaner 87m350 User Manual
SIIG Computer Hardware 04 0263E User Manual
Sonance Speaker System RK63 User Manual
Sony Cell Phone 1270 4315 User Manual
Sony Computer Accessories M SA C PC2 User Manual
Sony DVD VCR Combo SLV D950G User Manual
Sony Switch MK7807V1 User Manual
SunBriteTV Flat Panel Television 4660HD User Manual
Swann Security Camera SW244 BVD User Manual