Power Supply Module
• Uninterrupted power supply for
devices with 24VDC, max. 2.3A
• Current-limited, short-circuit-
protected output
• Monitoring of battery charging and
internal resistance of the batteries
• Installation into wall-mount cabinet or
19“ housing
• Status display at the housing front
• Complies with EN 54-4:2006
Description
The Power Supply Module NTM2402-1 serves for the The battery monitoring according to EN 54-4:2006 in-
safe supply of devices, which need a nominal voltage of cludes the periodical measurement of the battery volta-
24VDC. The typical fields of application include fire de- ge under load and the internal resistance of the battery.
tection systems and extinguishing controls or any other The integrated earth leakage monitoring of the module
applications requiring a safe power supply.
The output voltage of the integrated switched-mode
can be deactivated for special applications.
power supply is current-limited and short-circuit-protec- The module is designed for installation into a power sup-
ted.
ply housing. For that purpose, two different housings
are available. At the front of the housing, seven light
The optional stand-by batteries guarantee an uninterrup- emitting diodes indicate the operation as well as pos-
ted power supply in the event of a mains power fault. sible causes of faults.
At a typical charging time of 24 hours, batteries with a By means of the integrated test function, a functional
maximum capacity of 60Ah can be charged. The inte- check can be performed and the present value of the
grated protection against total discharge and the tem- internal resistance of the battery can be read out. With
perature compensated battery charging are the basis that, the maintenance of power unit and batteries is es-
for a long battery life.
pecially easy and timesaving.
Specifications
Operating voltage
Output voltage
Output current
Ambient temperature
Relative humidity
Dimensions L × W × D
Weight
230V +10/-20%, 47 – 63Hz
typ. 27.6VDC
max. 2.3A
-5°C to +50°C
max. 95% (no condensation)
230 × 150 × 52 (mm)
0.5kg
Approvals
VdS G208124
0786-CPD-20528
0786–CPD–20528
Order number
Order name
317020
Power Supply Module NTM2402-1
Building Safety. Building Security.
A
© LABOR STRAUSS SICHERUNGSANLAGENBAU GMBH • A-1231 WIEN • WIEGELESTRASSE 36 • TEL +43 1 52114-0 • FAX +43 1 52114-27
NTM2402-1_DBL_LST_EN_0851.PDF • PAGE 1
OFFICE@LST.AT • WWW.LST.AT • ALL RIGHTS RESERVED
|
Lexmark All in One Printer 90P3000 User Manual
Life Fitness Home Gym 829 User Manual
LOREX Technology VCR SG7965 User Manual
Lowrance electronic GPS Receiver AirMap 1000 User Manual
Magnavox TV VCR Combo TVCRCC13B1MG User Manual
Makita Chainsaw EA3500F User Manual
Makita Home Safety Product BML18 User Manual
Makita Sander BO3700 User Manual
Marshall electronic Microphone MXL2010 User Manual
Metra Electronics Automobile Accessories 99 7952 User Manual